How to Fix HP printer Error Code 0xc19a0035?

hp printer error code 0xc19a0035

The printers have been in constant use in the past few years and are gaining massive popularity. There are different brands which come to mind when one hears the name ‘printer’. Coming across its features, almost every brand provides with the same. The specifications can alter in different brands. Now one can find printers installed in cyber cafes, shops, hotels, classrooms, offices, etc. When one hears the name of different brands, there are a few specific ones which just cannot be skipped. HP is one of them, and it is one outstanding brand and has been the favorite of the users due to its stylish design, amazing features, user-friendly setup, and compact size. It can be used for any purpose either personal or professional. Since the device has been listed with such advancements, it can be loaded with some faults and errors sometimes. The device has been built on high tech features and one of the error code that the printer can get targeted is error code 0xc19a0035. If at any case your printer has encountered with such error, then you must get in touch with the Hp Printer Customer service number to discuss the faults and getting the rectification to the error.

The error is a really common issue and can arise anytime in the independent head cartridge. If you wish to fix the HP printer error code 0xc19a0035, then you must read the given steps:

  • Switch off the printer and disable all the cables that are connected to the printer and remove the printer from the power outlet.
  • Now you will have to open the front part of the printer and then open the part where you get access to the printer’s cartridge.
  • Now remove the ink cartridges head.
  • Now using a clean napkin dipped with isopropyl alcohol, clean the connector on the lower part of the ink cartridge.
  • After completing it, place it back again properly.
  • Now hold the buttons # and 3, which lie at the front side of the printer, and reconnect the power cord again.
  • Now connect back all the wires(take help if you wish) as you don’t have to release the hold of the two buttons
  • Now when you are switching on the printer, release the hold on the two buttons.
  • Once done, you will witness that the error code would have vanished and you will be able to use the printer again.

If these fixtures fail or do not work due to some technical snags, then you must immediately dial the HP printer customer support number without giving a second thought. The techies will listen to your worry patiently and would provide you with the best possible remedy which will prove to be the most effective.

Leave a Reply

Your email address will not be published. Required fields are marked *

DMCA.com Protection Status